Harbor Breeze 40105 Manual De Usuario página 13

ASSEMBLY INSTRUCTIONS
18. Connect the pin connector from the mounting
bracket (A) to the pin connector at the end of the wire
harness.
ASSEMBLY INSTRUCTIONS
19. Align the keyholes on the canopy (B) with the heads
of the mounting bracket screws (KK) preinstalled
in mounting bracket (A). Lift the canopy (B) up and
rotate it clockwise until the mounting bracket screws
(KK) engage the key slots.
Hardware Used
Mounting Bracket
KK
Screw
20. Secure the canopy (B) with the mounting bracket
screws (KK) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (KK) securely.
Hardware Used
Mounting Bracket
KK
Screw
18
18
19
x 2
20
x 2
13
D
A
Lowes.com/harborbreeze
A
KK
B
KK
B