Assembly Instructions - Harbor Breeze 40105 Manual De Usuario

ASSEMBLY INSTRUCTIONS

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method.
Helpful Hint: Downrod mounting is best suited for
ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle
mounting is best suited for angled or vaulted ceilings.
A longer downrod is sometimes necessary to ensure
proper blade clearance.
Note:
Flushmount installation and closemount
installation are not available for this item.
Important:

If using the angle mounting, check to
ensure the ceiling angle is not steeper
than 23°.
3. Ensure the blades (I) will be at least 30 in. from any
obstructions. Also check the downrod (D) length to
ensure the blades (I) will be at least 7 ft. above the
floor.
1
2
Downrod Mounting
Flushmount
3
D
I
7
Angle Mounting
Closemount
30 in. Min.
7 ft. Min.
Lowes.com/harborbreeze