ION VINYL FOREVER Guia De Inicio Rapido página 4

FEATURES
1. USB CONNECTION – Use the included USB cable to
connect VINYL FOREVER to your computer. The USB
connection will provide power to the unit.
2. LINE | PHONO SWITCH – Selects whether the input is
set to receive a line level or phono level signal. Select
'LINE' if using a CD player, MP3 player, tapedeck, mixer
etc. Select 'PHONO' if you are using a turntable that
does not have a preamp and its audio output is called
'phono'.
3. GROUND CONNECTOR – Used to ground a turntable
to the chassis. Use this only if your existing turntable
already has a ground connector on it.
4. RCA INPUT – RCA input for line level or phono level
devices.
5. HEADPHONE
headphones here (optional, not included). You can also
use your computer's built-in laptop speakers or speakers
attached to a computer tower.
6. HEADPHONE LEVEL – Adjust this to control the
headphone volume.
7. POWER LED – Indicates whether VINYL
FOREVER is powered on or off.
8. RECORDING LEVEL KNOB – Before
recording through a USB connection, use
this knob to adjust the recording gain. The
level should be high enough so that the loudest part of the song does not distort or "clip".
Refer to the EZ Vinyl/Tape Converter manual (PDF) on the included CD for more details on
adjusting the recording level.
OUTPUT – Connect
1
1/8" stereo
Note: Carefully peel off the clear plastic
backing to the sticker on the platter to see
the full shine of the LP.
4
2 3
4
6 7
5
8