Use; Using The Cordless Work Light Without A Power Connection; Maintenance And Cleaning; Disposal - LIVARNO LUX HG00150A Instrucciones De Utilización Y De Seguridad

Use

You can secure the product by using the hook
base on a flat, ferromagnetic surface. Using the joint
3
product can be tilted on the magnetic base to up to 180°.
Using the cordless work light
without a power connection
Fully charge the product as described in the section „Charging the
cordless work light".
The device can be operated in 4 different modes, select these by
repeatedly pressing the ON / OFF switch
first press:
second press: The side light is switched on with low power.
third press:
fourth press: switches off the spotlight

Maintenance and Cleaning

The product requires no maintenance. The LED lamps are not
replaceable.
Switch the product off and disconnect it from the mains supply
before cleaning.
Never immerse the product in water or other liquids.
Never use caustic cleaners.
Regularly clean the product with a dry, lint-free cloth. Use a slightly
moist cloth to remove any stubborn dirt.

Disposal

The packaging is made of environmentally friendly materials,
which may be disposed of through your local recycling
facilities.
Contact your local authorities for information on how to dispose of the
product at the end of the product's life.
To help protect the environment, please dispose of the prod-
uct properly, and not in household waste, when it has reached
the end of its useful life. Please contact your local authority
for information on collection points and their opening hours.
28 GB/MT
The side light
4
The side light is switched off and the spotlight
is switched on.
or the magnetic
5
.
2
is switched on at full power.
, the
9
1