Buick Rendezvous 2002-2007
1. Open center console and remove (2)
screws at front of console opening.
(Figure A)
2. Remove liners from cup holders and
storage pocket next to cup holders,
then remove screws. Unsnap and
remove panel. (Figure B)
(Figure A)
(Figure C)
3. Remove (2) screws from bottom of
radio/climate control bezel, unclip and
remove. (Figure C)
4. Remove (3) 9/32" hex head screws to
remove radio. (Figure D)
Continue to kit assembly
(Figure B)
(Figure D)
99-2011
Buick Riviera 1996-1999
1. Unsnap left side
panel exposing (1)
Phillips screw to
remove. (Figure A, 1)
2. Remove (1) Phillips
screw and unsnap
right side panel to
expose (1) Phillips
screw beneath panel
and remove.
(Figure A, 2)
3. Unsnap underside
of overhanging dash
(4)
(Figure A)
5
to unsnap (6) plastic
any necessary
rivets and remove
harnesses.
panel. (Figure A, 3)
6. Remove (3) Phillips
4. Remove (5) hex head
screw to remove
screws now exposed
climate control.
under overhang.
7. Remove (2) Phillips
(Figure A, 4)
screws to remove
5. Unsnap bottom
rear support and
edge of trim bezel,
(3) 9/32" hex head
then while holding
screws to
overhang up, unsnap
remove radio.
and remove trim
Continue to kit
bezel by removing
assembly
(1)
(2)
(3)