Checking The Length Of Time Until The Machine's Next Stop; Checking The Temporary Needle Bar Setting - Baby Lock Endurance II Manual De Instrucciones

Checking the Length of Time until the Machine's Next
Stop
The length of time until the embroidery machine's
next stop can be viewed in the embroidering
screen.
The machine stops when a spool change is
required, or when the machine is set to be stopped
by other settings. If the spool change indicator
appears, the machine will require a spool change.
When the time is indicated in red, this signals the
last color to be embroidered before the machine
stops.
1
1 Time until the machine stops

Checking the Temporary Needle Bar Setting

The needle bar with the temporary needle bar
setting applied can be viewed in the embroidering
screen.
For details on the temporary needle bar setting,
refer to the Instruction and Reference Guide.
Note
● The displayed information differs from that
described in the Instruction and Reference
Guide.
1
1 The needle bar number changes and
appears to indicate the selected needle bar.
16