1.1.
PURPOSE OF THE MANUAL
This manual was drawn up by the manufacturer and is integral part of the product.
It contains any useful information:
• to draw the attention of the installers to safety related problems;
• to install the device properly;
• to know its operation and limits;
• to use it under safe conditions.
The strict observance of the instructions contained in this manual grants safety conditions as well as
effi cient operation and a long life to the product.
To prevent operations that may result in accidents, it is important to read this manual from front to back
and to observe the instructions contained in it.
Instructions, drawings, photos and literature contained herein are exclusive property of APRIMATIC
S.p.A. and cannot be reproduced by any means.
1.2.
SAFETY NOTICES
!
Warning
The notices preceded by this symbol contain information, provisions or procedures that, when
not properly observed, may result in injury, death or long-term risks for the health of people or
for the environment.
Caution
The notices preceded by this symbol contain procedures or practical advice that, when not
properly observed, may result in serious damage to the machine or the product.
Information
The notices preceded by this symbol contain important information: the non-compliance with
these instructions voids the manufacturer's guarantee.
Despite all data have been collected and checked with maximum care, the manufacturer accepts no
liability for mistakes or omissions. The manufacturer reserves the right to effect changes related to
technological progress.
Lineare.indd
R
9
9
1
Introduction
25/07/2001, 15.22