Haier DW-7777-01 Guia De Instalacion página 7

IN ADDITION FOR NEW INSTALLATIONS
IN ADDITIoN foR NEW INsTAllATIoNs
Q. Electric drill with
Q. Electric drill with
R. ", "and 1 " hole saw bits
R. 1/2", 3/4"and 11/2" hole saw bits
S. Small tubing cutter
S. Small tubing cutter
T. Wire stripper
T. Wire stripper
U. 1 "- 2" screw-type clamp if
U. 11/2"- 2" screw-type clamp if
connecting to waste-tee
connecting to waste-tee
V. Copper tubing ( " recommended) or flexible strainless steel braided fill line
V. Copper tubing (3/8" recommended) or flexible strainless steel braided fill line
W. Clamp connector or conduit connector to fit a
W. Clamp connector or conduit connector to fit a 7/8"(2.2cm) diameter hole
pARTs supplIED
PARTS SUPPLIED
a. 2 drain hose clamps
A. 2 drain hose clamps
1-large
1-large
1-small
1-small
b. 2 Self-Tapping 4.2 X 18 Philip's-head screws
B. 2 Self-Tapping 4.2 X 18 Philip's-head screws
C. 7 Self-Tapping 3.5 X 13 Philip's-head screws
C. 7 Self-Tapping 3.5 X 13 Philip's-head screws
D. Drain hose
D. Drain hose
E. Sound pad (DWL3525, 4035 and 7075 models only)
E. Sound pad (DWL3525, 4035 and 7075 models only)
F. Sound Mat (DWL4035 and 7075 models only)
Make sure all these parts are included.
F. Sound Mat (DWL4035 and 7075 models only)
Make sure all these parts are included.
D
"(2.2cm) diameter hole
C
F
English
English
E
6
6