Remote Control Unit - Lenco DVP-940 Manual Del Usuario

Identification of Controls

Remote control unit

16 STEP
17
1 2
5 6
9 0
18
SUBTITLE
19
20
TITLE
21
ENTER
22
24
REPEAT SLOW
25
26
ZOOM
27
1. SOURCE
DVD/CARD/USB.
2. MUTE
Disable Audio output.
3.0-9 NUMBER BUTTON
Selects numbered items in a menu.
4.DISPLAY
To display the playtime and status information.
1
MUTE SOURCE
2
3 4
3
7 8
4
10+
DISPLAY
5
MENU
6
AUDIO
/PBC
7
8
9
10
MODE
11
VOL- VOL+
23
12
13
14
15
5.10+ BUTTON
In order to select a track 10 or greater, first press 10+, For example;
select track 12, first press 10+, and then press number 2 button.
6. MENU/PBC
Return to DVD root menu(DVD).
PBC on/off switch (VCD) .
7.AUDIO
Press AUDIO repeatedly during playback to hear a different
DVD
audio language or audio track, if avilable.
Press AUDIO repeatedly during playback to
MP3 CD VCD
hear a different audio channel ( Left,Right,Mix,Stereo).
8.PLAY/PAUSE
Press PLAY/PAUSE once to pause playback, pressing PLAY/
PAUSE second time will resume the playback.
9.STOP
When this buttom is pressed once, the unit records the stopped
point,from where playback will resume if PLAY(
wards. But if STOP button is pressd again instead of PLAY(
button, there will be no resume function.
10.MODE
Set LCD parameter(adjust bightness, contrast,and saturation).
11.VOL+
23.VOL-
Adjust volume
12.Forward Skip
Go to next chapter/ track.
13.Reverse Skip
Go to previous chapter/ track to the beginning.
14. BUTTON
Press BUTTON allow skipping ahead at 5-level speed(X2->X4->
X8->X16->X32->PLAY), press PLAY button return to normal playback.
)is pressed after
)