EdilKamin MYA Instalación Uso Y Mantenimiento página 32

Commissioning must be done by a Technical Service Centre
according to the UNI 10683/2012 standard.
This standard indicates the control operations to be carried out
in situ, aimed at ascertaining correct system function.
see the
according to the type of pellets used and installation conditions,
thereby starting the guarantee.
Failure to have the stove ignited by an authorised C.A.T. pre-
vents Edilkamin from guaranteeing correct functioning. .
ignited, however, this will disappear quickly.
Before igniting you must check:
that installation is correct
the power supply
that the door closes properly to a perfect seal
that the combustion chamber is clean
that the display is on standby (the date, power or temperature
FILLING THE PELLET HOPPER
The hopper lid opens and closes with a practical click-clack
system. Simply apply slight pressure to the front part of the
MYA is designed and programmed to burn wood pellets with
6 mm diameter.
from compacted sawdust, compressed under high pressure
with no adhesives or foreign materials.
They are sold in bags of 15 kg.
For the stove to function properly, you MUST NOT burn
will render the warranty null and void. Such use is detected by
laboratory analyses. Edilkamin has designed, tested and pro-
grammed their stoves to guarantee the best performance when
pellets with the following characteristics are used:
INSTRUCTIONS FOR USE
-
- 32
*
press
If pellets with different characteristics are used, the stoves
must be recalibrated a similar procedure to that carried out by
malfunctions; stop the stove from functioning due to clogging,
dirt on the glass, unburnt fuel, etc.
A simple, visual analysis of the pellets may be carried out:
smooth, uniform length, not very dusty.
with longitudinal and transverse cracks, very
dusty, various lengths and mixed with foreign matter.
-