Publicidad
Idiomas disponibles
Idiomas disponibles
11. Speaker Emulated Output
This output emulates the tonal characteristics of a guitar speaker
cabinet and provides a natural valve overdrive tone for connection
to a recording device or mixing desk. Always use a good quality
screened guitar lead.
12. Input
Plug your guitar in here. Always use a good quality screened guitar lead.
13. Valve Viewing Window
Through this grille you can see the ECC83 valve at the heart of your
pedal.
WARNING: Do not attempt to remove the fixing screws or grille. No
user serviceable parts inside.
14. Channel 1 On/Off LED
When the GREEN LED is on Channel 1 is on. When the LED is not
on, Channel 1 is off.
15. Channel 1 On/Off Footswitch
Press this switch to turn Channel 1 on or off.
16. Channel 2 On/Off LED
When the RED LED is on Channel 2 is on. When the LED is not on,
Channel 2 is off.
17. Channel 2 On/Off Footswitch
Press this switch to turn Channel 2 on or off.
18. AC Inlet
For the input of the 16V AC / 0.8A adapter supplied. Always use a
Blackstar approved adapter.
7
Technical Specification
Power: 16V AC
Maximum Current Draw: 0.8A
Controls: Gain 1, Gain 2, Bass, Middle, Treble, ISF, Level 1, Level 2
Valve: ECC83 / 12AX7
Switches: Channel 1 On/Off Switch, Channel 2 On/Off Switch,
Clean/Crunch Switch (Channel 1)
Indicators: Channel 1 On/Off, Channel 2 On/Off, Power On/Off
(Valve Backlight LED)
Jacks: Input, Output, Emulated Output
Input Impedance: 1MΩ
Output Impedance: < 1KΩ
Dimensions (mm): 160 x 119 x 80
Weight: 1.2kg
AC Adaptor: ADA Series supplied
18
1
3
4
5
CH1 GAIN
BASS
MIDDLE
CRUNCH
CLEAN
0
10
0
10
0
10
2
CH2 GAIN
HT-DUAL
10
11
PURE VALVE DISTORTION
CH 1
14
15
6
7
8
TREBLE
ISF
CH1 LEVEL
0
10
0
10
0
10
9
CH2 LEVEL
12
13
CH 2
16
17
8
Publicidad
