Installation Procedure; Installing The Heat Shield - Gaggenau CI 292 600 Instrucciones De Instalación

▯
If the inside of the cupboard is no wider than 29
inch (750 mm), make cutouts in the side panels.
2
Note: If the appliance is installed in an island unit or
another installation that is not described here, you must
ensure that the cooktop is sufficiently ventilated.
/
1

Installation Procedure

9
CAUTION
Sharp edges. Use protective gloves when
installing the cooktop.
Note: The appliance is heavy. It is advisable to install it
with a second person.

Installing the heat shield

9
CAUTION
Sharp edges. Use protective gloves when
installing the plate.
For safety reasons, the heat shield must be properly
installed. This prevents components from overheating as
a result of the recirculation of hot air from the cooktop.
The heat shield is the same width as the cooktop. For
shipping, it is screwed to the burner box.
After unpacking the cooktop, unscrew the heat shield.
The heat shield will be able to rotate freely, as shown in
the illustration.
9