Replacing The Heating Element - jbc JTSE-A Serie Manual De Usuario

Replacing the Heating Element

Only perform this operation when the element is cold and the unit is disconnected from the mains.
1. Loosen the screw.
2. Pull the heating element out of the handle.
3. Connect the new heating element, ensuring it is pushed all the way in.
4. Tighten the screw.
Handle
Ref. 0009829
Changing the JT-TA Heater Hose Set
1. Unplug the power cable.
2. Use a spanner to unscrew the nut.
3. Make sure that the new heater tube fits into
the grooves in the socket.
4. Tighten the screw.
12
Heating Element
Ref. 0014107 (230V)
0014105 (100V / 120V)
Heating Hose Set
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)