Pick & Place - jbc JTSE-A Serie Manual De Usuario

Pick & Place
(not supplied with JT)
This tool helps you place and remove SMDs of any size easily thanks to the suction pump.
Pick & Place
Ref. T260-A
Operation
Choose the needle and the suction cup that best fits the component and start as follows:
Suction cups
Maximum working temp: 250ºC (482ºF)
Insert the needle with
the appropriate cup
for a correct suction
process.
Bent Needles Set
Ref. 0861660
Press the button to
start/stop the suction
Make sure the needle
does not protrude
from the cup.
Straight Needles Set
1. Suction
Once the suction is
activated, cover the
pen hole with your
finger and lift off the
component.
w w w.jbctools.com
Ref. 0901546
2. Release
Lift your finger to
release the
component.
13