Operation Modes - jbc JTSE-A Serie Manual De Usuario

Adjustable Stand
Adjust the tool holder angle to suit your work position.

Operation Modes

1. From the Tool Settings Menu, select the mode to activate the tool depending on the task.
Tool button
Press
Press the start/stop button to blow hot air.
2. The tool stops blowing when pressing the start/stop button.
If the stand is connected to the station and for safety it will also stop when returned to the stand.
4
Pedal*
Press
Press the Pedal to blow hot air and release
to stop.
*The P-005 Pedal is not supplied with this
station.
See our website.