Connect Cameras To Nvr - Ezviz cs-bn8 Guia De Inicio Rapido

The figures in this manual are for reference only and may differ from the actual product.

Connect Cameras to NVR

1
Connect one end of the network cable to the camera's network connector and the other end to the NVR's PoE (Power over
Ethernet) network connector.
2
Connect the External Display and Mouse
1 Connect the monitor and NVR with the HDMI cable (included) if you want to operate the system with the local menu. The Connect the monitor and NVR with the HDMI cable (included) if you want to operate the system with the local menu. The
NVR also supports VGA output (VGA cable not included). NVR also supports VGA output (VGA cable not included).
2 Connect the mouse to NVR via the USB port. Connect the mouse to NVR via the USB port.
Connect the Network Cable
3
Connect the NVR to the router with the blue network cable via the network port. Connect the NVR to the router with the blue network cable via the network port.
ENGLISH
LAN
USB
1
LAN
USB
2
LAN
USB
WPS/
POWER WAN LAN1 LAN2 LAN3 LAN4 RESET