Prepare Installation Space - Thermador MASTERPIECE Serie Instrucciones De Instalación

Prepare Installation Space

Create the cut-out in the countertop according to the
installation diagram. The angle of the cut surface to the
countertop must be 90°.
The lateral cut-out edges must be flat in order to ensure
that the retaining springs are well-positioned on the
appliance. With multi-layered countertops, secure strips
laterally in the cut-out if necessary.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat- and water-resistant manner.
Observe minimum distance between device underside
and furniture parts of /
3
8
Cutout dimensions for 30" cooktops:
Models:
CEM304NS
▯
CET304NS
▯
" (10 mm).
Cutout dimensions for 36" cooktops:
Models:
CET366NS
▯
CET365NS
▯
CEM365NS
▯
7