Application Settings - OHAUS Defender 6000 Manual De Instrucciones

Defender 6000 Indicators
4. After that to fill the third time, if the total load is now more than or equal to
SP2 while less than SP3, the first two columns display green, the third
orange, and others red.
5. To load the fourth time, if the total load is now more than or equal to SP3
while less than SP4, the first three columns display green, and the forth one
orange.
6. Nevertheless, if the total load is more than SP4, all the four columns turn to
red and the instrument will be in a stop state.

3.6.5 Application Settings

The application can be customized for user preferences. Please refer to Application Settings section in
Weighing Mode for details about how to enter application settings.
The Filling Configurations are defined below (defaults in Bold)
Item
FIll
Filling （
）
Note: you cannot disable Filling if you are in the mode currently.
Available Settings
On, Off
Comments
To enable Filling Weighing
EN-23