ENGLISH
Fitting and removing the bowl (fig. A)
Place the bowl (2) on the pin (7), aligning the lugs (8) with
N
the recesses (9).
Fix the bowl by turning it counter-clockwise until the lugs
N
(8) engage in the slots (10).
To remove the bowl from the appliance, turn the bowl
N
clockwise and take it off.
Assembling the bowl (fig. A)
Carefully place the chopper blade (4) over the raised
N
centre of the bowl (2).
Put the ingredients in the bowl.
N
Place the lid (3) on the bowl
N
Fix the lid by turning it counter-clockwise until the ribs (5)
N
are seated over the lugs (6).
To remove the lid from the bowl, turn the lid clockwise
N
and take it off.
Use
Switching on and off
Before switching on, make sure that the bowl (2) is fixed and
check that the lid (3) is seated correctly.
To switch the appliance on, press the on/off switch (1).
N
To switch the appliance off, release the on/off switch.
N
Warning! Do not operate the appliance continuously for more
than 1 minute. After operating the appliance continuously for
1 minute, let it cool down for at least 2 minutes before
operating it again. After operating the appliance for 4 cycles,
let it cool down to room temperature before operating it again.
After use
Remove the bowl from the appliance.
N
Remove the lid from the bowl.
N
Carefully remove the blade from the bowl.
N
Take out the chopped ingredients from the bowl.
N
Operating times
Time (s)
Nuts, cheese
10-15
Boiled eggs, meat
10-15
Spices
30
Breadcrumbs
10-15
Light batter
10-15
Parsley
10-15
Garlic, onions, shallots
pulse
Ice cubes
pulse
Cleaning and maintenance
Warning! Before cleaning and maintenance, unplug the
appliance. Be careful when cleaning the blades - they are
sharp.
4
N
N
Warning! Do not immerse the appliance in water or any other
liquid.
Protecting the environment
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
Maximum quantity
after-sales service and contacts are available on the Internet
120-150 g
at: www.2helpU.com
120 g
Technical data
150 g
25 g
150 ml
Voltage
25 g
Power input
150-180 g
4-5 small ice cubes
Wash the bowl, lid and blade in warm soapy water and
dry well.
Wipe the stand with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Separate collection. This product must not be
disposed of with normal household waste.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
SC300
V
230
W
100