Acoustic Feedback - Philips AZ7681 Manual Del Usuario

Ocultar thumbs Ver también para AZ7681:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
Storing the last position played – RESUME
You can store the last position played. When restarting,
playback continues from where you have stopped.
1 Switch the slider to RESUME during playback to
activate RESUME.
is shown.
y
RESUME
2 Press 9 whenever you want to stop playback.
3 Press 2; whenever you want to resume playback.
is shown and playback continues from
y
RESUME
where you have stopped.
• To deactivate RESUME, switch the slider to OFF.
goes off.
y
RESUME
Locking all buttons – HOLD
You can lock the buttons of the player. When a key is
pressed, no action will be executed then.
1 Switch the slider to HOLD to activate HOLD.
All buttons are locked. HoLd is displayed by
y
pressing any key. If the player is switched off,
HoLd is displayed only by pressing 2; and 9.
2 To deactivate HOLD, switch the slider to OFF.
Note: When you deactivate HOLD by switching the slider
to RESUME and restart, playback continues from
where you have stopped.
16
Selecting different playing possibilities – MODE
It is possible to play tracks in random order, to repeat a track or the CD, and to play
the first few seconds of each track.
1 Press MODE during playback as often as necessary
until the display shows either:
: All tracks of the CD are played in random
y
SHUFFLE
order until all of them have been played once.
: All tracks of the CD are
y
SHUFFLE REPEAT ALL
played repeatedly in random order.
: The current track is played repeatedly.
y
REPEAT
: The entire CD is played repeatedly.
y
REPEAT ALL
SCAN: The first 10 seconds of each of the
y
remaining tracks are played in sequence.
2 Playback starts in the chosen mode after 2 seconds.
3 To return to normal playback, press MODE until the display indication disappears.

Acoustic feedback

The player is equipped with a feature that accompanies various key operations with
an acoustic signal.
• Keep DBB depressed for more than 3 seconds.
If the acoustic signal was deactivated:
bEEP is displayed and the acoustic signal is
y
activated.
If the acoustic signal was activated:
no bEEP is displayed and the acoustic signal
y
is deactivated.
FEATURES
17

Publicidad

Tabla de contenido
loading

Tabla de contenido