Unit Controls; In-Cab Control Box; Display, Keys And Symbols - Thermo King Ce-Serie Manual Del Operador

ELECTRONIC CONTROL SYSTEM

UNIT CONTROLS

WARNING!
Never operate the unit unless you completely
understand the controls; otherwise serious
injury may occur.

IN-CAB CONTROL BOX

Display, Keys and Symbols

It is always active except when the unit
1. Display.
is disconnected (no power) or when the unit is
connected but has been manually switched off
from the In-cab Control Box. It normally displays
the return air temperature.
10
This key is used to start/stop the
2. ON/OFF Key.
unit by holding the key down for at least 1 second.
Single press for exit to the previous level menu.
3. Set Key. Selects prompt screens and
information screens. Single press: enter the next
level menu.
Is used to increase the setpoint
4. Up Key.
temperature, display values, and for menu scroll
up.
Is used to reduce the setpoint
5. Down Key.
temperature, display values, and for menu scroll
down.
6. Cool Symbol. The unit is cooling.
7. Heat Symbol. The unit is heating.
8. ºC / ºF Display. Indicates whether the on-screen
temperature reading is in degrees Celsius (ºC) or
degrees Fahrenheit (ºF).
Indicates that there is an alarm
9. Alarm Symbol.
in the system.
Indicates the evaporator unit
10. Defrost Symbol.
is in Defrost Mode.
11. Dot Symbol (decimal). Indicates power
presence, only when unit is off.