Attaching The Fan Blades - Progress Lighting AirPro P2598 Manual De Instalación

Attaching the Fan Blades

NOTE: Your fan blades are reversible. Select
the blade side finish which best accentuates
your decor.
Step 1 Attach blades to blade arms using three
screws and fiber washers as shown in Fig. 5.
Start a screw into the arm, do not tighten.
Repeat for the 2 remaining screws and
washers.
Step 2 Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
Step 3 Fasten the blade assembly to the motor
using the motor screws provided. (Fig. 5)
Screws
Fiber
Screws
washers
Blade arm
Motor
Figure 5
Attaching the Motor Cover
Step 1 Remove the six screws and lock washers
from the motor collar. (Fig. 6)
Blade
Step 2 Place the motor cover over the motor. Align
the mounting holes with the holes in the motor and
fasten using the six screws and lock washers
previously removed. (Fig. 6)
Motor
cover
Motor
collar
Figure 6
Screws
4.