Napa CARLYLE W12TD36 Instrucciones De Operación página 5

REPLACING THE HEAD KIT (CONT.)
Step 5: Insert the pawl with the square hole onto the
switch and the circle hole facing you. See fig. 5
Step 6: Insert the driver into the ratchet head aligning the
teeth on the driver with the teeth on the pawl. See fig. 6
Step 7: Place the lid on the driver with the chamfer side
of the lid facing out. See fig. 7
TW12TD36
Fig. 5
Fig. 6
Fig. 7
5 Rev. 06/08/16