The
and
touch keys are repeti-
tive, so if you keep them pressed they
increase or decrease in a continuous
manner.
Only one hotplate can be selected at a
time, in other words only one decimal
point will be lit up (9) (except when
more than one hotplate is being
timed).
Quick switch-on at maximum power:
Select the hotplate and press touch key
(11) once. The hotplate will be acti-
vated at its maximum power (level 9).
SWITCHING OFF THE HOTPLATE
1 The hotplate must previously be
selected. Its decimal point (9) must
be lit up.
2 Using the touch key
the power to level 0. The hotplate
will switch off.
Quick switch-off: Whatever the power
level setting is, by simultaneously pres-
sing touch keys
and
hotplate will switch to level 0.
When a hot plate is switched off an
will appear in its power indicator, if the
glass surface of the related cooking
area is hot and there is a risk of burns.
When the temperature drops, the indi-
cator switches off (if the hob is discon-
nected), or otherwise a "-" will light up
if the hob is still connected.
SWITCHING OFF THE DEVICE
The device can be switched off at any
time by pressing the general on/off
touch key
(1). In standby mode an
H will appear in the areas that are hot.
The indicators for the rest of the hot-
plates will not light up.
The switching off of the device or of
each individual hotplate will be accom-
panied by a longer beep than the rest.
After use, disconnect the
device by using its control and do
not rely on the pot/pan detector.
Locking of the touch keys
of the induction hob
By using touch key lock
may lock all the touch keys of the
touch control panel. This prevents
functions from being activated acci-
dentally and children from playing with
the controls.
Bear in mind that when the touch con-
trol is on, you can still switch it on/off
using touch key
function is activated (pilot light 10 is
on). On the other hand, if the touch
control is switched off, the locking
function does not allow the on/off
touch key
first deactivate the lock.
To activate or deactivate the function,
keep touch key
about 1 second. When the function is
activated, the pilot light (10) lights up.
Silencer of the beep
When the hob is on, if one presses the
touch key "+" and the locking touch
key
(8) simultaneously for three
(11), lower
seconds, the beep that accompanies
each action will be deactivated.
This deactivation will not be applied to
all the functions, as for example the
beep for on/off, the ending of the timer
(12/11), the
or the locking/unlocking of the touch
keys always remain activated.
H
To once again activate all the beeps
that accompany each action, again
simultaneously press the
and the locking touch key
three seconds.
Power Function
(Power concentration)
This function allows the hot plate to be
given extra power, in excess of its
nominal power. The said power
depends on the size of the hot plate
and it can reach the maximum value
allowed by the generator.
POWER
CONNECTION
1 Activate the related hotplate to
power level
2 From power level
key
be displayed in the indicator.
The Power boost function has a maxi-
mum duration of 10 minutes. After this
time has elapsed, the power level will
automatically reset to level
(8) you
On activating the Power boost function
in one hotplate, it is possible that the
performance of some of the others
may be affected, reducing its power to
(1) even if the lock
(1) to be used. You must
(8) pressed for
touch key
(8) for
BOOST
FUNCTION
9
.
9
, press touch
(12), and the P symbol will
9
.
a lower level, in which case this will be
displayed on its indicator (3).
POWER BOOST FUNCTION DIS-
CONNECTION
The Power boo st function can be dis-
connected by pressing touch key
(11) to return to power level
The function may also automatically
be disconnected if the temperature of
the cooking area becomes too high.
Timer function
This function makes it easier to cook,
as you do not need to be present
throughout the process: the timed hot
plate(s) will switch off automatically
after the set time has lapsed. There is
a separate timer for each hot plate,
which allows all of the hot plates to be
timed simultaneously.
With these models you can use the
clock as a timer for the hotplates for
times ranging from 1 to 99 minutes. All
the cooking areas can be programmed
individually and in a simultaneous
manner.
Timing one hotplate
1 The cooking zone to be timed must
be selected. The related decimal
point must be lit up.
2 Select a power level for the hotpla-
te from 1 to 9 using the touch keys
or
(12/11).
3 Press clock touch key
indicator (7) will display 00.
4 Immediately afterwards, enter a
cooking time between 1 and 99
minutes, by using the touch keys
or
(12/11). With the former
the value will start at 1, whereas
with the latter it will start at 60. By
pressing both at the same time the
value will be reset to 00.
When the clock indicator (7) stops flas-
hing, it will start to count down the time
automatically. The indicator (3) relating
to the timed hotplate will alternately
display the selected power level and
the
symbol.
01
When the clock reaches
from counting down minutes to seconds.
Once the selected cooking time has
elapsed, the heating zone being timed
is turned off and the clock emits a series
GB
9
.
(6). Timer
, it will switch
19