Dyna-Glo DGB730SNB Manual De Instrucciones página 18

ASSEMBLY INSTRUCTIONS
22. Insert the charcoal pan (21) into the support rails on
the bottom of charcoal grill body.
23. Secure gas hose and LP gas hose holder (30)
assembly onto 23 cart left side panel assembly (13)
bytighteningoneM4x12screw(D)andoneM4nut
(F) into hole into cart left side table.
NOTE: The LP gas hose holder (30) must completely
circle the gas hose before securing onto cart left side
panel (13) as illustrated.
Hardware Used
D
M4x12Screw
F
M4 Nut
24. Open the cart door assembly (15 & 14) and insert the
LP gas cylinder (sold separately) into the nesting hole
located in the bottom shelf (1). Align the hand screw
coupling of the hose/regulator with the threaded valve
of the cylinder by turning the LP gas cylinder until
positioned correctly. Hand tighten the hose/regulator
coupling to the threaded valve of the LP gas cylinder.
Tighten the tank screw until the cylinder is secure
inside the nesting hole of the bottom shelf (1).
22
23
x1
x1
24
Rotate the tank screw clockwise.
18
D
13 30
1
21
F