Philips HQ7845 Manual Del Usario página 11

The shaver has not been rinsed long enough or
B
the water used was not hot enough.
◗ Clean the shaver thoroughly before you
continue shaving (see chapter 'Cleaning and
maintenance').
Cause 2: long hairs are obstructing the shaving
B
2
heads.
1
C
◗ Open the shaving unit, turn the wheel
anticlockwise (1) and remove the retaining
frame (2).
C
◗ Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
◗ Remove the hairs with the brush supplied.
◗ Put the shaving heads back into the shaving
unit, put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
B
◗ Open the shaving unit, turn the wheel
anticlockwise and remove the retaining frame.
◗ Remove the old shaving heads from the
shaving unit and replace them with new ones.
ENGLISH
13