Description Of Symbols - Silverline 657946 Traducción Del Manual Original

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries.
For indoors use only!
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Conforms to relevant legislation and safety standards.
4
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
Ah
n0
°
Ø
Hz
W, kW
/min or min
-1
rpm
F
dB(A)
Specification
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230-240V~ 50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96W
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,350min
Grindstone diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56mm
Duty cycle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S3: 30%, 3min on, 7min off
Angle adjustment:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-50°
Drill bit capacity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13mm
Flat blade capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-51mm
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75.1dB(A)
PA
Sound power L :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.6dB(A)
WA
Uncertainty K:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: : Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration. www.osha.europa.eu provides information
on sound and vibration levels in the workplace that may be useful to domestic users who
use tools for long periods of time.
Volts
Alternating current
Ampere, milli-Amp
Amp hours (battery capacity)
No load speed
Degrees
Diameter
Hertz
Watt, kilowatt
Operations per minute
Revolutions per minute
Farad (capacitance)
Decibel sound level (A weighted)
-1