How To Charge Your Electric Vehicle (Evr30-B1C, And Evr40-B2C) - Leviton evr-green EVR30-B1C Guia De Instalacion

How to Charge
Your Electric Vehicle
(EVR30-B1C and EVR40-B2C)
1.
Turn ON.
a.
Push button.
2.
Prepare your car.
Use your vehicle's manual to make sure
your car is ready for charging.
3.
Start charging.
Press and hold the black button on the top
of the charge plug and insert it into the inlet
on your car. Charging starts automatically.
The CHARGE light will flash green.
4.
How to stop and restart.
To stop charging, press black button on top
of charge plug to remove plug. To restart
charging, press black button and reinsert.
5.
After charging is complete.
NOTE: When charging is complete,
loop charging cable over station to prevent
tripping hazard.
NOTE: If the charging station is not being used for an extended period of time,
it should be turned off.
b.
All lights are on during self test.
c.
After self test, power indicator will
be GREEN. Station is ready for
charging.
POWER
CHARGE
FAULT
13
POWER
CHARGE
FAULT
Button
Button