Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Electronic Clock
When you switch on the oven, you will notice
that the word AUTO will flash on the display
with 00:00. Press the + and – symbols until
you hear a beep and see a dot flashing
between the digits of the clock. Then set the
clock time by pressing on the + or – symbols.
You will hear a beep to confirm that the time
has been set. The
Should you wish to change the time, follow
these instructions again.
Manual Operation
After setting the clock, the oven is ready for
use. Select a cooking temperature and
function by pressing and turning the oven
controls.
To turn off the oven, set the controls to
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to
programme cooking time length, after which
the oven will turn off automatically.
Cooking Stop Time: This function allows you to
programme the time for cooking to stop,
after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been
programmed
for.
automatically at the entered stop time.
Changing the Clock Alarm Tone
1 Press + and - at the same time. You will
notice a dot light up between the + and –
symbols on the clock display.
2 Press M and you will see "ton1" light up on
the clock display.
3 The alarm tone can be changed by
repeatedly pressing on the – symbol.
10
symbol will remain lit.
It
switches
itself
Oven Use
Programming the Timer Alarm
1 Press on M. The
clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or –.
3 The alarm will be confirmed by two
consecutive beeps and the display will show
the current time. The
4 At the programmed time, the alarm will
sound and the
5 Press on any symbol to turn off the alarm.
The
symbol will continue to flash.
6 Keep pressing M until the function is
switched off.
You can see how much time is left at any time
by pressing M until the
.
can then change the selected time by
pressing + or –. The beep you hear will
confirm the new time has been set.
Programming Cooking Time
1 Press M until you hear a beep. Press M
again and the word "dur" will appear on the
clock display.
2 Select the cooking time by pressing + or –.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off
automatically.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
off
6 Press any symbol to turn off the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on M until you hear a beep to
show the function is now off. Then set the
controls to
You can see how much time is left and change
the remaining cooking time. Follow the
previous instructions.
To cancel this function, just press + and – at
the same time.
symbol will flash on the
symbol will remain lit.
symbol will begin to flash.
symbol flashes. You
to switch off the oven.
Publicidad
