Publicidad
Idiomas disponibles
Idiomas disponibles
Programming the Cooking Stop Time
1 Press M until you hear a beep. Then press M
until the word "End" appears on the clock
display.
2 Select the cooking stop time by pressing
+ or –.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off
automatically.
4 Select a cooking function and temperature.
5 When it is the time for cooking to stop, the
oven will switch off and an alarm will sound.
6 Press any symbol to turn of the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on M until you hear a beep to
show the function is now off. Then set the
controls to
to switch off the oven.
You can use this function even if you are
cooking with the oven. If this is the case,
follow all of the above instructions except No.
4.
You can see the stop cooking time at any time
by following instruction No.1.
Programming Cooking Time and Cooking
Stop Time
11 Press M until you hear a beep. If you press
M again, the word "dur" will appear on the
clock display.
12 Select the cooking time by pressing + or –.
13 A beep will then sound and the present
time and AUTO will show.
14 Press M until you hear a beep. Then press
M until the word "End" appears on the
clock display.
15 Select the stop cooking time by pressing
+ or –.
16 A beep will then sound and the present
time and AUTO will show.
17 Select
a
cooking
temperature.
18 The oven will remain off with AUTO on the
clock
display.
programmed.
function
and
The
oven
is
now
19 When it is the time for cooking to start, the
oven will switch on and cooking will
continue for the selected time. The
symbols AUTO and
clock display.
10 When the programmed time is reach, the
oven will switch itself off and an alarm will
sound.
11 Press any symbol to stop the alarm. The
oven will remain off and AUTO will continue
to flash.
12 Press M until you hear a beep in order to
switch off the function. Then set the
controls to
to switch off the oven.
You can see the state of the timer at any time
by following instructions 1 and 4.
If you wish to modify the timer setting, you
must cancel the function by pressing + and - at
the same time. Re-programme the oven by
following the instructions given.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 00:00
will flash on the display. Reset the clock and
programme again.
will light up on the
11
Publicidad
