Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• EEI:
The benchmark for most efficient circulators is EEI ≤ 0,20
* The pump is equipped with a power limiting function which provides protection
against overload. This can have an effect on the output depending on operation.
5.3 Suitable fluids
• Heating water according to VDI 2035.
• water/glycol mixture at a mixing ratio of max. 1:1. If glycol is added, the delivery
data of the pump must be corrected according to the higher viscosity, depending
on the percentage mixing ratio.
• SALMSON's approval must be obtained for use of other media.
5.4 Scope of supply
• Circulating pump + gaskets + connector.
• Installation and operating instructions.
6 Description and operation
6.1 Pump (Fig. 1)
• The pump consists of a hydraulic system, a glandless pump motor with permanent
magnet rotor and an electronic control module (ECM technology) with integrated
frequency converter.
• The control module includes a display for setting all parameters and for displaying
the current electricity consumption in W and the cumulative electricity
consumption in kWh since commissioning.
7 Installation and electrical connection
DANGER! Danger of death!
Incorrect installation and electrical connection can result in fatal injury.
• Installation and electrical connection may only be carried out by qualified
personnel and in accordance with the applicable regulations!
• Adhere to regulations for accident prevention.
7.1 Recept of the product
Unpack the pump and recycle packaging to take care of the environment.
7.2 Installation
• Only install the pump after all welding and soldering work has been completed
and, if necessary, the pipe system has been flushed through.
• Install the pump in a readily accessible place for easy inspection and dismantling.
• When installing in the feed of open systems, the safety supply must branch off
upstream of the pump (DIN EN 12828).
Salmson
refer to name plate data
English
21
Publicidad
Tabla de contenido
