Safety Signs; Product Identification Label - Mountfield BC 500 Li 48 Manual De Instrucciones

3.2 SAFETY SIGNS

The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
Read the instruction manual
before using the machine.
Anyone operating the
machine under normal
conditions for continuous
daily use may be exposed
to a noise level equal to or
exceeding 85 dB (A). Wear
ear protectors, safety goggles
and a protective helmet.
Wear protective gloves
and safety footwear.
PROJECTION HAZARD!
Be careful of flying debris
projected by the cutting
means, that can cause
serious injuries to persons
or damage to things.
PROJECTION HAZARD!
People or pets must be
kept at least 15 m away
when using the machine!
Beware of blade thrust.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Sound power level
2. Conformity marking
3. Year of manufacture
4. Type of machine
5. Manufacturer's reference model
6. Serial number
7. Name and address of Manufacturer
8. Article code
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.
EN - 8
Do not use circular saw
blades. Danger: using
circular saw blades
on models that are
not designed for them
exposes the user to the
risk of very serious or
even fatal injuries.
Do not leave the
machine in the rain (or
in damp conditions).