Kohler K-9925 Guia De Instalacion página 3

36" (91.4 cm)
K-9925
K-9928 36" (91.4 cm)
K-9996 42" (106.7 cm)
K-9997 42" (106.7 cm)
K-9998 48" (121.9 cm)
30" (76.2 cm)
K-9925
24" (61 cm)
K-9928
24" (61 cm)
K-9996
21" (53.3 cm)
K-9997
30" (76.2 cm)
K-9998
11/16" (1.7 cm)
Roughing-In
NOTICE: All dimensions are nominal. The stud opening tolerance is +1/4" (6 mm) and -0 (0 mm).
Carefully measure your fixture before determining enclosure size. When a fire-rated wall is specified,
dimensions are to the inside of the wall board. Some shimming between the stud frame and the fixture
may be required. Dimensions given in the roughing-in information are crucial for proper installation.
Construct the framing and plumbing accurately.
NOTE: If a firewall is required, increase the roughing-in dimensions according to the thickness of the
firewall material. Stud opening dimensions must be measured toward the exposed side of the wall
material.
NOTE: If the unit will be installed against a masonry wall, make provisions for plumbing connections.
Construct a separate frame wall a minimum of 6" (15.2 cm) from the masonry wall.
Kohler Co.
K-9925 48" (121.9 cm)
K-9928 60" (152.4 cm)
K-9996 60" (152.4 cm)
K-9997 42" (106.7 cm)
K-9998 48" (121.9 cm)
3
1-1/4"
(3.2 cm)
Flange Detail
31-1/8" (79.1 cm)
K-9925
31-1/8" (79.1 cm)
K-9928
37-1/8" (94.3 cm)
K-9996
37-1/8" (94.3 cm)
K-9997
40-1/8" (101.9 cm)
K-9998
3-3/8" (8.6 cm)
1-11/16" (4.3 cm)
K-9925
4-1/4" (10.8 cm)
K-9928 4-3/8" (11.1 cm)
K-9996 4-9/16" (11.6 cm)
K-9997 4-1/4" (10.8 cm)
K-9998 4-9/16" (11.6 cm)
3" (7.6 cm)
K-9925
3-1/8" (7.9 cm)
K-9928
3-5/16" (8.4 cm)
K-9996
3" (7.6 cm)
K-9997
3-5/16" (8.4 cm)
K-9998
1087934-2-A