Install The Plumbing - Kohler K-9925 Guia De Instalacion

Side View
Wood Subfloor
2" (5.1 cm)
Drain Pipe
Receptor
6" (15.2 cm)
K-9925
K-9928
K-9996
K-9997
K-9998

1. Install the Plumbing

NOTE: Follow all local codes, standards, and regulations.
Locate rough plumbing for the drain according to the correct model's roughing-in dimensions. Refer
to the roughing-in provided with this guide.
NOTE: If the plumbing will be located on an unfinished stud wall, install the supplies after the receptor is
installed.
Position the plumbing according to the roughing-in information.
Cap the supplies and check for leaks.
Install a 2" (5.1 cm) drain pipe cut to extend 3/4" (1.9 cm) to 1" (2.5 cm) below the subfloor or slab.
A pocket is required in a slab construction to accommodate the drain fitting.
Provide access to make drain connections to the receptor.
1087934-2-A
3/4" (1.9 cm) to
1" (2.5 cm)
Below Subfloor
Wood Subfloor
44-1/2" (113 cm)
57" (144.8 cm)
57" (144.8 cm)
39" (99.1 cm)
44-1/2" (113 cm)
Drain Cutout
Side
Side View
Concrete Subfloor
2" (5.1 cm)
Drain Pipe
Receptor
6" (15.2 cm)
6" (15.2 cm)
4
3/4" (1.9 cm) to
1" (2.5 cm)
Below Slab
2-1/2" (6.4 cm)
Min
Concrete Subfloor
Kohler Co.