Chaparral Monterey Instrucciones De Montaje página 8

T
x 2
V
x2
FIG. 8
8. Rotate left side assembly and set in place on the Right Lower Side Assembly (H). Repeat
Step 3 and attach the Right Lower Side Assembly (H) to the two Sleepers (B) using
Screw (T) and to the Base (G) through the cleat using Screws (V). See Figure 8.
V
x 8
U
x 4
FIG. 9
9. On a protective surface, place the Upper Assembly on its top. Next, turn the Lower
Assembly upside down and place it on the Upper Assembly. Position the Lower Assembly
onto the Lower Top (C), that is attached to the Upper Assembly, with equal distance side
to side. Also, make sure the back edge of the Lower Assembly is flush to the back edge of
the Lower Top (C). Use Screw (V) in the cleats and sleeper to secure the two assemblies
together. See Figure 9.
Tap in the Tack Glides (U) as shown in Figure 9.
Page 8 – 549W
T
S
U
U
U
V V
V
V
T
S
U
Upper Assembly
Lower Assembly
V
V
Flush