Lenco PDR-035 Manual De Usuario página 11

Time/Date
Under the Time/Date selection, there are several setups as described below.
Set Time/Date
You can manually set the time and the date under this menu.
Auto Update
You can set the Time/Date update condition as listed below.
● "from Any":
● "from Digital Radio":
● "from FM":
● "No Update":
Set 12/24 Hour
You can set the time display format as 12 or 24 Hour display.
Set Date Format
You can set the date display format as DD-MM-YYYY or MM-DD-YYYY.
Clock Style
You can set the clock style display in Standby mode. They are Normal Digital, Big Digital, Classic Analog and Modern Analog.
Note:
- Clock display in Standby mode is only available when it is in adaptor charging mode.
Note:
- The clock function is operated only when the unit is in adaptor charging mode. When it is operated using the built-in battery,
the clock time will not be memorized in standby mode.
Backlight
If there is no user operation on the unit for a period of time (timeout), the unit's display backlight level could automatically be
lowered to save power. The timeout can be set to 10sec, 20sec, ..., upto 180sec. If the timeout is set to "On", it means the display is
always on without any auto-dim function. In addition, you can set the display backlight level and dim level respectively.
Language
You can set the unit in different operation languages.
Factory Reset
This function resets the unit to the original factory settings.
Software Version
It will show the unit software version.
Time/Date will be updated by either DAB or FM broadcast.
Time/Date will be updated by DAB broadcast only.
Time/Date will be updated by FM broadcast only.
Time/Date will never be updated.
11