Fm Radio Operation - Lenco PDR-035 Manual De Usuario

FM RADIO OPERATION

Station Scanning
1. Turn on the unit in FM mode.
2. Press the or button repeatedly to manually tune to a different frequency.
3. Or press and hold the
Storing FM Presets
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. To save it to the preset channel 1 or 2 or 3, press and hold the prefered preset number. Then it will save to that preset channel.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button "4". A preset channel list will be displayed.
4. Rotate the ENTER knob (or press the
5. Press the ENTER knob to save.
Recall Stored FM Presets
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button "4". The preset channel list will be displayed.
3. Rotate the ENTER knob (or press the
4. Press the ENTER knob to recall.
Stereo/Force Mono Selection
When receiving a Stereo FM radio channel, pressing the ENTER knob will switch between stereo audio and force mono audio.
Note:
The telescopic antenna at the rear panel of the unit should be fully extended to ensure a good reception. Alter the antenna
-
position for the best reception.
Displaying FM Station Information
There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.
1. Radio Text
Scrolling text which shows information on music titles or program details provided by the radio station
2. Program Type (PTY)
Type of program provided by the broadcaster
3. Frequency
Current channel frequency
4. Audio Type
Stereo or Mono
5. Battery Level
100 is maximum
6. Date
Displays the current date provided by the radio station
OTHER FM MENU OPERATIONS
Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the
different options as described below.
Scan Setting
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the
3. Rotate the ENTER knob (or press the
ENTER knob confirm. When the "Strong Stations Only" is selected, only the strong stations are detected. Scanning will ignore the
noisy stations. When "All Stations" is selected, all stations will be detected during FM scanning even if the radio station is noisy.
4. The next time doing the FM scan the unit will search for the stations based on this confirmed setting.
5. To quit the menu control, press the BACK button repeatedly.
or button to automatically search to the next available channel.
or button) to select the desired preset channel to save.
or button) to select the desired preset channel to recall.
or button) until the "Scan Setting" is selected and then press the ENTER knob.
or button) to select "Strong Stations Only" or "All Stations" and then press the
8
or button) for