Additional Wireless Sensor(S) (Optional); Smart Life App; Account Registration; Connect Weather Station To Wifi Network - Bresser Tuya Smart Manual De Instrucciones

ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)

The console can support up to 7 wireless sensors .
1 . In the new wireless sensor, slide the Channel switch to a new CH number
2 . Press the [ RESET ] key on the new sensor .
3 . At the back of the console, press the [ SENSOR / WI-FI ] key enter sensor synchronization
mode
4 . Wait for the new sensor(s) to pair up with the console . (about 1 minute)
5 . Once the new sensor(s) are connected to the console successfully, their temperature and
humidity will be shown accordingly .
NOTE:
- Channel number of the sensor must not be duplicated among the sensors . Please refer to "INSTALL
Wireless thermo-hygro SENSOR" for details
- This console can support different type of additional wireless sensor(s), e.g. soil moisture. If you would
like to pair up additional sensors, please check with your retailer for more detail .
SENSOR(S) RESYNCHRONIZATION
Press the [ SENSOR / WI-FI ] key once for the console to enter sensor Synchronization mode
(channel number blinking), and the console will re-register all the sensors that have already been
paired to it before .
REMOVE WIRELESS SENSOR
User may manually delete any sensor from the console .
1 . Press the [ CHANNEL ] key until the console shows the display of the selected sensor .
2 . Press and hold [ REFRESH ] key for 10 seconds, until its readings are reset " -- , -
shown .

SMART LIFE APP

ACCOUNT REGISTRATION

The console works with Smart Life App for Android and iOS smart phone .
1 . Scan the QR code to go to the Smart Life download page or
visit: https://smartapp .tuya .com/smartlife
2 . OR Download the Smart Life App from Google Play or Apple
App store .
3 . Install the Smart Life App .
4 . Follow the instruction to create your own account using phone
number or email .
5 . Once the account registration is completed, the Home Screen
will be shown .
NOTE:
- There is no Registration code needed if email method is chosen .
- The App may be subject to change without notice .
- You may be prompted to allow the App to have access to your location . This will allow the app to give you
general weather information in your area . The app will still work if you don' t allow access to that .

CONNECT WEATHER STATION TO WIFI NETWORK

1 . Press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually, indicated
by blinking AP and
automatically enter and stay at AP mode .
2 . Open Smart Life App and follow the in-app instructions to connect weather station to your Wi-Fi
network .
. When the console is power up for the first time, the console will
27
°C -- % " is
Smart Life for
Android /IPhone
EN