Bresser Tuya Smart Manual De Instrucciones página 28

Step 1:
At the home screen , tap the
top right corner to add your console .
Step 6:
Once it success, the console icon will shown,
and you can customize its information .
Step 7:
The console will appears on your Home
Screen . Tap to see the readings .
Step 2:
On "Add Manually" screen, choose
"Sensors" in the left menu bar and
then select "Temperature and Humidity
on the
Sensor(Wi-Fi)" .
Step 5:
There will auto scan and register
your device .
28
Step 3:
Make sure you select the 2 .4G network
and enter your Wi-Fi password then tap
the "Next" .
Step 4:
Confirm your device is in "AP mode" and
tap "Next" .