- K210A MODEL
Model 647
(7" Round wall cap)
Model 415
7" Round adjustable
elbow (optional)
Model 407
(7" Round—
2 ft sections)
Model 412
Transition
(3¼" x 10" to 7")
Adapter and damper 3¼" x 10"
(supplied with P5 and P8 blowers)
(supplied with P5 and P8 blowers)
(supplied with P5 and P8 blowers)
Backsplash (RMP Series)
(Stainless steel wall covering
with warming shelves. Optional)
HL0070
INTERIOR BLOWERS
Model 634 or 644
(roof cap)
8" Round adjustable
Model 413
Transition
(3¼" x 10" to 8")
Standard
3¼" x 10"
duct
Flow deviator
(vertical exhaust only)
Rough-in kit
Model P5
single-blower
(500 cfm)
RANGE HOOD SYSTEM
elbow (optional)
8" Round
standard
duct
NOTE: The dual blower P8 must be
- 3 -
-
Model 643
(8" Round wall cap)
Model 459 transition
(3¼" x 14" to 8")
Standard
3¼" x 14" duct
Adapter and damper
3¼" x 14"
(supplied with P8 blower)
K210A HOOD
Model P8 dual-blower (900 cfm)
For use with 36" hoods or wider
installed with 3¼" x 14" duct. If it
is impossible to connect the dual
blower P8 to a 3¼" x 14" duct,
use a 3¼" x 10" duct. In that
case, the blower performance
will be decreased by 25%.