Chef's Choice HYBRID 250 Manual Del Usuario página 8

CERAMIC KNIVES
The Hybrid® is not recommended for ceramic knives.
SCISSORS
Do not attempt to use the Hybrid® to sharpen scissors. EdgeCraft does manufacture
special sharpeners designed just for scissors.
BRANDS OF KNIVES
The Hybrid® will put an excellent edge on all conventional metal Euro/American and
Santoku style knives regardless of brands, including Henckels, Wüsthof, Sabatier, Lamson
and Goodnow, Global, Russell Harrington, Chef'sChoice, Messermeisser, Forshner, Mundial,
Cuisinart, Kitchen Aid, Shun and many, many more.
TEST FOR SHARPNESS
To test for sharpness and cutting ability of your fine edge knives, hold a sheet of paper
vertically by its upper edge and carefully cut down through the sheet a small (but safe)
distance from your fingers. A sharp edge (on a straight edge blade) will cut smoothly
without tearing the paper.
Alternatively try cutting a tomato. The knife should penetrate the skin of the tomato and
cut through it on the first pull without applying significant force to the knife.
MAINTENANCE
• The exterior of the Hybrid® can be cleaned with a damp soft cloth.
• Periodically shake out and dispose of the metal sharpening dust by inverting the
sharpener and lightly tapping it onto a newspaper, paper towel, or other paper sheet.
• No oils or other lubricating liquids are necessary with this sharpener.
825 Southwood Road, Avondale, PA 19311 U.S.A.
Assembled in the U.S.A.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the
product. Chef'sChoice®, EdgeCraft®, Diamond Hone®, EdgeSelect® and the overall design of this product are
registered trademarks of the EdgeCraft Corporation.
Conforms to UL Std. 982
© 2019 The Legacy Companies
E19
The Legacy Companies
Consumer Support 1-800-342-3255
Certified to CAN/CSA Std. C22.2 No. 64
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
E/F/S
English — 8
chefschoice.com
Printed in China.
C2082z4