Waterpik WP-480 Manual De Instrucciones página 9

6. Hose Attachment to Diverter Valve:
Locate ridged hose connection end. Line up the notches on the diverter
valve with the raised areas inside the hose nut and insert then turn ¼ turn
to lock into place. (6A)
6A
To Showerpik Power Handle:
®
Hand tighten hose end to the hose
inlet on the back of the Showerpik
power handle. (6B)
7. If showerhead or diverter valve
becomes loose during use, re-tighten
large nut as described in step 5.
1 / turn
4
6B
Tighten
®
8. Attach your fixed mount showerhead or handheld showerhead bracket
to the threads of the Showerpik
had previously been installed on the shower pipe. If you own a fixed
mount or handheld showerhead with a Waterpik
reinstallation instructions in next section.
NOTE: Showerhead attachments may vary from pictures above.
® diverter just as the showerhead
hidden pivot ball see
®
9