Brizo MultiChoice T60P Serie Manual De Usuario página 8

Valve Trim Installation
4
(See page 8 & 9 for Siderna® valve trim installation.)
A.
1
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut.
Note: Depending on the location of the
valve in the wall and wall thickness,
an optional extension kit (RP81665)
can provide an additional 1 3/4" of wall
thickness.
C.
3
Secure the escutcheon (1) to the bracket
(2) using the 2 screws provided (3). Do not
overtighten escutcheon screws.
2
2
1
T60P Series Installation
B.
2
If your model requires a spacer (1), insert
it into the sleeve (2) and push it to the
front. Slide the sleeve over the cartridge,
body and O-ring.
D.
7
4
5
6
Slide trim ring (1) over trim sleeve (2) and
insert into escutcheon (3). Models with
side set screw in handle base - Secure
handle (4) onto the stem using screw (5)
and a phillips head screwdriver. Insert
button (6)into handle. Models with axial
screw in handle blade - Secure handle
onto the stem using set screw and hex
wrench (7).
8
1
1
2
3
1
2
1
102236 Rev. B