MFL41469212-Edit1-en5-mi 3/12/09 9:04 PM Page 28
EXTERNAL EQUIPMENT SETUP
NOTES
!
To get the the best picture quality, adjust the PC
G G
graphics card to1680x1050.
G G
To enjoy vivid picture and sound, connect the PC
to the TV.
G G
Avoid keeping a fixed image on the TV 's screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
G G
Connect the PC to the RGB (PC) port of the TV;
change the resolution output of PC accordingly.
G G
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolu-
tion or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
Supported Display Specifications (RGB PC)
Resolution
640x480
800x600
1024x768
1280x1024
1680x1050
28
Horizontal
Vertical
Frequency ( KHz )
Frequency ( Hz )
31.469
59.94
37 .879
60.317
48.363
60.004
63.668
59.895
65.290
59.954
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
The synchronization input waveform for
G G
Horizontal and Vertical frequencies are separate.
G G
Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
If you use too long an RGB-PC cable, there may
G G
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.