Multiplex RX-7 SYNTH DS M-PCM Instrucciones página 8

! These operating instructions are an integral part
of the product, and contain important information
and safety notes. Please keep them in a safe place
at all times, and be sure to pass them on to the new
owner if you ever dispose of the product.
1. S
PECIFICATION
RX-7-SYNTH 35MHz
M-PCM A-band
Order No. # 5 5845
Reception system MULTIPLEX Pulse Code Modulation (M-PCM)
Servo channels
Current drain
Weight
Dimensions
RX-7-SYNTH DS 35MHz
M-PCM A-band
Order No. # 5 5850
Reception system
Servo channels
Current drain
Weight
Dimensions
RX-9-SYNTH DS 35MHz
M-PCM compact A-band
Order No. # 5 5855
Reception system
Servo channels
Current drain
Weight
Dimensions
RX-9-SYNTH DS 35MHz
M-PCM A-band
Order No. # 5 5860
Reception system
Servo channels
Current drain
Weight
Dimensions
RX-12-SYNTH DS 35MHz
M-PCM A-band
Order No. # 5 5865
Reception system
Servo channels
Current drain
Weight
Dimensions
1)
41MHz band only approved for use in France.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de
Operating Instructions RX-7-SYNTH M-PCM /
RX-7/9/12-SYNTH DS M-PCM / RX-9-SYNTH DS M-PCM compact receivers
35MHz
40/41MHz
B-band
# 5 5846 # 5 5847
7
approx. 15 mA (excl. servos)
23 g
approx. 44.0 x 29.0 x 17.0 mm
35MHz 40/41MHz
B-band
# 5 5851 # 5 5852
MULTIPLEX Pulse Code Modulation
(M-PCM), dual conversion
7
approx. 25 mA (excl. servos)
31 g
approx. 56.0 x 22.5 x 24.5 mm
35MHz 40/41MHz
B-band
# 5 5856 # 5 5857
MULTIPLEX Pulse Code Modulation
(M-PCM), dual conversion
9
approx. 25 mA (excl. servos)
31 g
approx. 56.0 x 22.5 x 24.5 mm
35MHz 40/41MHz
B-band
# 5 5861 # 5 5862
MULTIPLEX Pulse Code Modulation
(M-PCM), dual conversion
9
approx. 50 mA (excl. servos)
61 g
approx. 64.0 x 48.0 x 25.5 mm
35MHz 40/41MHz
B-band
# 5 5866 # 5 5867
MULTIPLEX Pulse Code Modulation
(M-PCM), dual conversion
12
approx. 50 mA (excl. servos)
61 g
approx. 64.0 x 48.0 x 25.5 mm
Shared specification
Modulation
Reception system
Available
RF channels /
frequencies
1)
Sensitivity
Servo signal rate
Aerial length
Operating voltage
Operating temperature
range
2. S F
PECIAL
1) Synthesizer receivers, requiring no plug-in crystals
Integral error counter
Receiver Diversity operation possible
(except RX-7-SYNTH M-PCM)
Can be updated to new software versions via PC
Compatible with the MULTIPLEX MULTImate
MULTIPLEX M6 connector system as battery socket on
RX-9/12-SYNTH DS M-PCM
3. S N
AFETY OTES
1) ! Read the instructions before using the receiver for the
first time
! Use the receiver for its intended application only (
! Be sure to use a power supply of adequate capacity
( 7.)
! Read and observe the installation notes (
! Carry out regular range checks (
! Keep strictly to the following sequence when switching
ON and OFF
First switch the transmitter ON, then switch the receiver ON.
First switch the receiver OFF, then switch the transmitter OFF.
1)
4. A
PPLICATIONS
The RX-7-SYNTH M-PCM, RX-7/9/12-SYNTH DS M-PCM and
RX-9-SYNTH DS M-PCM compact receivers are radio control
system components designed exclusively for use in modelling
applications. Their use in vehicles designed to carry persons
and for industrial applications is prohibited.
5. C
OMPATIBILITY
These receivers can only be operated in conjunction with
1)
transmitters which exploit M-PCM transmission technology. As
of March 2009 these are the following:
ROYALpro 7, 9 and 12
ROYALevo 7, 9 and 12, if they have been upgraded to soft-
ware Version V2.xx as part of the Upgrade Action by the
MULTIPLEX Customer Service Department, and are fitted
with the HFM-S M-PCM/PPM RF module.
FM
MULTIPLEX Pulse Code Modulation
(M-PCM), dual conversion
see table on page 6
approx. 2 µV
16 ms
900 mm
4.0 V ... 9.0 V
4 - 6 NiCd / NiMH (NiXX) cells
2S LiPo / LiIo
- 20°C ... + 55°C
EATURES
14.)
4.)
13.)
Page 1/6