Philips NORELCO 5625XL Manual Del Usario página 13

4 Brush the inside of housing and Razor Head Assembly.
5 Replace the Razor Head Assembly back on razor.
Every Two Months: Razor Heads
1 Turn razor OFF by sliding the switch to "OFF" position
and disconnect from outlet.
2 Remove Razor Head Assembly from housing unit.
3 Brush the inside of the housing.
4 Turn Razor Head Assembly over so that the underside is
exposed.
5 Press down and turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
7 Remove and clean one cutter and head at a time.
• Be careful not to mix up cutters and heads. They are a
matched set and if interchanged it will greatly affect shav-
ing performance.
8 Separate the cutter from the comb.
13 13