Kenmore 119.16148110 Manual De Uso Y Cuidado página 15

Install Grill Transport Handle
14
Attach Transport Handle and 2 Handle Heat Shields to the back of the Firebox using 4 Flat Head
Bolts (M6x25mm).
Grill Transport Handle Heat Shield
Qty: 2
Flat Head Bolt M6x25mm
Qty: 4
Place and Secure LP Cylinder into the Cabinet
15
Be sure the LP cylinder is "OFF" by turning the hand wheel clockwise until it stops. Place the LP
cylinder down into the tank support hole in the bottom of the cabinet. Be sure the grill burner
controls are turned to the "OFF" position. Remove the safety cap from the cylinder valve. Center the
nipple of the grill regulator into the cylinder and turn the black nut clockwise until it stops. Hand
tighten only.
Hang the Propane Tank Support Chain around the LP tank and attach to its hook to secure the
tank.
Propane Tank Support Chain
Qty: 1
15