PLYMOVENT MULTISMART ARM Instrucciones Para El Uso página 7

MultiSmart
MSA-XXX-3
3 m,
10 ft
2 m,
7 ft
1 m,
3 ft
0 1 m,
3 ft
The MultiSmartArm's operating range from a side
view. The picture shows the wall bracket mounted
on the highest recommended height (2,2 m). The
lowest recommended height is 1,1 m. All height
measures refers to the wall bracket's upper side.
2. Fit the wall bracket(A) directly against the
wall or on a stanchion PA-110 or PA-220.
If the bracket is fitted directly to the wall,
make sure that the structure of the wall is
strong enough.
3.
If you have purchased a MSA-XXX-3 you can skip to step no.5. If you have purchased a
MSA-XXX-4 or a SAE-XXX-4 please continue to following the step by step instructions.
4. Place the endcap(d) at the end of the extension piece(b). Remove the axle, washers and nut(c1) from
the wall bracket(a) , and remount those parts in the same order on the extention piece(c2). The small
L-shaped "tube keepers"(e) and the longer part of the axle should face up. Attach the extention piece to
the wall bracket with the supplied nut and bolt (f), placing one of the fiber washers(G) on each side of the
wall bracket.
A
0000101888/071013/A MultiSmart Arm
Arm
®
MultiSmart Arm
®
MSA-XXX-4
2 m, 3 m, 4 m,
7 ft 10 ft 13 ft
F
C1
F
MultiSmart Arm
®
MSA-XXX-3
4 m,
14 ft
3 m,
10 ft
2 m,
7 ft
1 m,
3 ft
4 m,
3 m,
14 ft 10 ft
The MultiSmartArm's operating range from a top
view. The wall bracket is to be placed in such a
way that the place of work is within the shaded
area.
E
G
MultiSmart Arm
®
MSA-XXX-4
1 m,
2 m, 1 m,
0
3 ft
7 ft 3 ft
A
B
4 m,
2 m, 3 m,
14 ft
7 ft 10 ft
C2
D
EN - 6