Technical Description; Technical Data - PLYMOVENT MULTISMART ARM Instrucciones Para El Uso

Multismart arm
®
MultiSmart
The PlymoVent "MultiSmart
flexible and efficient extractor for dust, welding fumes, sol-
dering fumes, oilmist, fumes from solvents etc. The outer and
inner tubes are coupled by a gas spring balanced paralel-
logram arm for which we have a patent application. The
construction allows a stepless positioning within the
operating range. The MultiSmart
smooth movement. The MultiSmart
its mounting height and is manoeuvrable through 190 - 230°
depending on length. Both inner and outer tubes are made
of light, smooth aluminium tubing. This not only makes the
arm rugged but also minimizes the total weight and noise
level, even at high extraction rates. As an option there is a
shut-off damper on the outer tube with a rubber sealing lip to
minimize the noise level when the damper is shut. The shut-of
damper control knob has several distinct positions which
makes it possible to fine tune the airflow through the arm.
Advantages
• CLEAR-THRU design- all components on the outside of
the tubes, resulting in less pressure drop.
• Supplied assembled - thus redusing installation time and
cost.
• Gas springs which balance the arm in any position
- giving very smooth movement caracteristics.
• Easy flexible hose removal - allowing easier cleaning or
hose replacement.
• Three different dimensions; Ø 125, Ø 160, Ø 200 mm
( 5"Ø, 6"Ø and 8"Ø ) and two lengths 3 and 4 m ( 10'
and 14') - for all needs.
• Safety encased paralellogram arm - eliminates possible
injury.
• Rubber sealed damper with accurate damper control (ac-
cessory). Less noise when the damper is shut and stays in
position at any airflow.

Technical data

Arm
MultiSmart
®
The MSA-XXX-3 can be changed to a MSA-XXX-4 by ad-
ding a SAE-XXX-4 extension kit.
MultiSmart ® Arm MSA-XXX-3
0000101888/071013/A MultiSmart Arm
Arm
®
Arm extraction arm is a very
® "
Arm has an extremely
®
Arm reaches high above
®
MultiSmart ® Arm MSA-XXX-4

technicAl deScription

© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
Delivery
The arm is delivered completely assembled. To ac-
complish a variety of mounting solutions it can be
combined with stanchions PA-110 or PA-220.
Prod. Max.
no. working
radius*
m, ft
MSA-125-3
MSA-160-3
MSA-200-3
MSA-125-4
MSA-160-4
MSA-200-4
* 5 m, 16' with MSA-XXX-3 and stanchion PA-220.
Ser.no: MSA
Date: Oct-05
Replace:Aug98
hose rec.
diameter airflow m
mm, in
3, 10' 400 - 700, 240 - 410
125, 5"
3, 10' 800 - 1400, 470 - 820
160, 6"
3, 10' 1300 - 2000, 770 - 1180
200, 8"
4, 14' 400 - 700, 240 - 410
125, 5"
4, 14' 800 - 1400, 470 - 820
160, 6"
4, 14' 1300 - 2000, 770 - 1180
200, 8"
MultiSmart Arm/ENG/USA/CAN/2/15
®
/h, cfM
3
EN - 2