SOMFY Home Motion Sonesse 30 RTS Guia De Instalacion página 7

USE
Mode Selection:
Roller or Tilting mode
By factory default, the motor is in
Roller mode but you can change from
one mode to another.
Move the shade away from the end
limits.
1) Press the UP and DOWN buttons
until the shade jogs.
2)Press and hold the MY and DOWN
buttons simultaneously until the shade
jogs to change from Roller mode to
Tilting mode.
MY position
1) Recording MY position.
To set the MY position, move the
shade to the desired position with the
UP and DOWN buttons then press the
MY button until the shade jogs.
2) Changing the MY position
To change the MY position go to the
new desired MY position with the UP
and DOWN buttons then press the MY
button until the shade jogs.
3) Delete the MY position
To delete the MY position, move to this
position and press the MY button until
the shade jogs.
Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009
1
2
1
2
3
5